关键词:
粘附
覆层材料
覆层
划格试验
切割试验
尺寸
格板
仪器
天然漆
材料测试
测量仪器
涂料
耐力
抽样方法
试验设备
试验报告
测试
测试条件
公差(测量)
清漆
标准号:
DIN EN ISO 2409-2007
摘要:
This International Standard describes a test method for assessing the resistance of paint coatings toseparation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to thesubstrate. The property measured by this empirical test procedure depends, among other factors, on theadhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded,however, as a means of measuring *** a measurement of adhesion is required, attention is drawn to the method described in ISO *** 1 Although the test is primarily intended for use in the laboratory, the test is also suitable for field *** method described may be used either as a pass/fail test or, where circumstances are appropriate, as asix-step classification test. When applied to a multi-coat system, assessment of the resistance to separation ofindividual layers of the coating from each other may be *** test can be carried out on finished objects and/or on specially prepared test *** the method is applicable to paint on hard (e.g. metal) and soft (e.g. wood and plaster) substrates,these different substrates need a different test procedure (see Clause 6).The method is not suitable for coatings of total thickness greater than 250 pm or for textured *** 2 The method, when applied to coatings designed to give a rough patterned surface, will give results which willshow too much variation (see also ISO 16276-2).